• 3" Front Lift Spacers-- CNC Machined From T-6 6061 Aluminum (Also available in Black anodized for additional $20.00)
• 6 longer top plate spacer studs
• 2" Rear Lift "Medium load" coil springs
  (OME 895)
• Install Directions

• 3" Front Lift Spacers-- CNC Machined From T-6 6061 Aluminum (Also available in black anodized for additional $20.00)
• 6 longer top plate spacer studs
• 2" Lift Rear ToyTec custom "stock ride" coil springs
• Install Instructions

• 2 OME Front lift coil springs (884 coils are the standard Light front coils)

NOTE: Select coil spring part number below if optional front coils are desired before adding to cart or 884 coils will be shipped
NOTE: 886 Heavy front coils require OME N140s front shocks sold below. OME front shocks will improve ride quality.
• ToyTec Top plate spacers For a full 3" front lift
• 6 top plate studs
• 2" lift OME 895 (Medium load) rear coil springs (recommended for vehicles with continuous additional rear weight)
• Installation instructions

• 2 OME Front lift coil springs (884 coils are the standard Light front coils)

NOTE: Select coil spring part number below if optional front coils are desired before adding to cart or 884 coils will be shipped
NOTE: 886 Heavy front coils require OME N140s front shocks sold below. OME front shocks will improve ride quality.
• ToyTec Top plate spacers For a full 3" front lift
• 6 top plate studs
• 2" lift ToyTec "stock ride" rear coil springs (10% increase above stock capacity and spring rate for the best ride and flex)
• Installation instructions

• ToyTec Front coil over shocks adjustable from 1 to 3 1/2" front lift
• Pre set to 2 1/2" lift
• Front bolt on lift, no spring compressor needed
• Bilstein 5100 Maintenance free shocks
• Fits 05-08 Tacoma trucks, FJ cruiser and 03-08 4Runner
• Includes spanner wrenches, sway bar relocates and instructions

• Adjustable for 0 to 3 1/2" front lift
• Improved ride on/off road at higher speed
• Complete bolt on front lift!
• Comes assembled and preset to 2 1/2" front lift
• This part number is specifically valved for 06-07 FJ cruiser
• Order spanner wrench below

• 3" Lift Front Coil Spring Spacer Kit-- CNC Machined From 6061 T-6 Aluminum (Also available in Black anodized for additional $20.00)
• 6 longer top plate spacer studs
• Install Directions

• 2.5" Lift Front Coil Spring Spacer Kit-- CNC Machined From 6061 T-6 Aluminum (Also available in Black anodized for additional $20.00)
• Install Directions

• 2" Lift Front Coil Spring Spacer Kit-- CNC Machined From 6061 T-6 Aluminum
• Install Directions

• 2 Top plate spacers with 6 longer studs
• Provides approximately ¾” lift

• Top plate spacer adds approximately 1/2" lift
• Great for correction of drivers side ride height
• includes 1 spacer

• OME Front coil springs (884 coils are standard, 885 coils can be substituted and will be required for a full 3" lift on Double cab models). Choose from coil choices below
• ToyTec top plate spacers for a full 3" lift
• 6 top plate studs
  NOTE: Front OME shocks sold below are required for 886 coils and will improve ride quality with all coil options

• Bilstein front Zinc plated front shocks
• Priced per set of 2
•  Nitrogen charged gas shock
• 4 lower spring cup clip positions allow the front to be lifted for leveling up to 2 1/2"
• Improved ride & control on/off road
• Bilstein Quality & lifetime warranty
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• NOT RECOMMENDED FOR USE WITH LIFT SPACERS OR COILS UNLESS LOWEST (STOCK) SETTING IS USED

• 2 OME 883 front coils
• Can be used for front leveling without lifting the rear
• Approximate lift is 1 1/2" 
• installation instructions

• 2" Rear Lift "Stock ride" coil springs 
• 10% increase in load capacity/spring rate
• These coils are custom made to our specs for a stock like ride and great flex off road, adds 2" additional flex per side when used with shocks below
• priced per set

• 2" lift rear Old Man Emu coil springs
• Recommended for those who need a increased load capacity
• These are a firmer riding rear coil without additional weight in the rear
• Priced per set

NOTE: We recommend stock length shocks or OME N141 shocks below only with these coils

• 1 1/2" lift rear coil spring spacers
• Made from high quality polyurethane
• These can be used alone or with any of the coils we sell for additional lift
• Priced per set
• Fits FJ cruiser 07& 08 and 03-08 4Runner

• Bilstein HD front shocks
•  Nitrogen charged gas shock
• Good match for all of our front lift options on 07 FJ
• Great price!
• Improved ride & control on/off road
• Bilstein Quality
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• Bilstein front Zinc plated shocks
• Priced per set of 2
•  Nitrogen charged gas shock
• 4 lower spring cup clip positions allow the front to be lifted for leveling up to 2 1/2"
• Improved ride & control on/off road
• Bilstein Quality
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• NOT RECOMMENDED FOR USE WITH LIFT SPACERS OR COILS UNLESS LOWEST (STOCK) SETTING IS USED

• These are a longer rear Bilstein 5125 series shock for improved flex off road
• Comes with proper bushings and eye to stud adaptors as shown
• Perfect match for our Toytec rear coils, adds 2" more flex per side
 
• Nice ride on/off road
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• These are a longer Hydraulic rear shock for improved flex off road
• Perfect match for our Toytec rear coils, adds 2" more flex per side
when used with our coils
• Great price!
• soft ride on/off road
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• These are a longer Nitrogen charged rear shock for improved flex and performance off road
• Perfect match for our Toytec rear coils, adds 2" more flex per side when used with our coils
• Great price!
• Nice ride on/off road
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair with boots

• OME (Old Man Emu) Nitrogen charged gas shock
• Designed for the Best ride on/off road with OME front coils
• Will also work with ToyTec Spacer lifts
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• These are a longer rear Nitrogen gas charged shock for improved flex and control off road
• Perfect match for ToyTec RCC2.0 coils - Add 2" more flex per side when used with our coils
• Great price!
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• These are a rear Nitrogen gas charged shock for improved control off road
• Perfect match for OME 895 rear coils
• Great price!
• Reduced shipping will be calculated if bought with a ToyTec Lift Kit
• Priced per pair

• D.O.T. approved Extended length rear Brake lines (2) For 07 FJ cruiser
• Works great with 0" to 4" rear lift
• 5 layer lines have a plastic covering for the best corrosion resistance
• Fits perfectly into stock mounting bracket
• Includes 4 clips for mounting in stock brackets
• No additional shipping if bought with a ToyTec Lift Kit

• Spanner wrench for Icon/Light Racing coilovers
• Fits all Icon & Light Racing coilovers as well as Sway-a-way, Fabtech, and many others.
• No additional shipping if ordered with any other products

• Relocates front swaybar to eliminate contact with coil/shock off road
• Can be used with any 3" suspension lift
• Bolt on design
• Made from t-6 aluminum Billet with metric Zinc plated hardware
• No additional shipping if bought with a ToyTec Lift Kit

• Specialty products/Light Racing adjustable upper control arms
• At last an adjustable arm for 1/2 the price of competitors
• Great addition for smooth suspension travel and perfect alignment after lifting; adjustable camber and caster +or- 5 degrees
• Provides additional clearance between coil and arm/ tire and wheel
• Fits all FJ And '03-'07 4Runners
• Installation instructions included.

• This kit allows you to drop the front differential 1”. reducing the angles on your c.v. axles and boots which can help prolong the life of these components! Our diff drop spacers are machined from high quality 6061 t-6 aluminum, come with grade 8 mounting hardware, and install directions.
• Fits all '05-'07 Toyota Tacoma, FJ And '03-'07 4Runners
• No shipping and handling if purchased with one of our kits.