-TTBOSS207-ALM - Toytec Aluma Series Boss Suspension System (07-21 Tundra) 2"-3" Lift
Brand
Toytec Lifts
Part Number
TTBOSS207-ALM
From $1,686.71
To $3,551.91
Vehicle Fitment:
- 2007-2021 Tundra 4WD/2WD - All models
Fitment Notes:
***This configuration is for use exclusively with aftermarket upper control arms to accommodate between 2'' to 3'' of lift***
In the Denver area? We install! Call today to schedule a time.
-TTBOSS207-ALM - Toytec Aluma Series Boss Suspension System
Aluma Series Coilovers and shocks provide a great ride quality while offering additional benefits. This kit provides 2-3" of lift in the front with 1-2" in the rear for leveling or maintaining a slight rake.
Kit Includes:
- Toytec 2.0 Front Aluma Series Coilovers
- The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
- Front Aluma Series Coilovers are adjustable from 2-3" of lift
- Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
- Aluma Series Coilovers are assembled and ready to bolt on. No spring compressor or special tools needed for installation.
- Includes preload adjustment tool and owners manual.
- This suspension kit includes nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
- Heavy duty 16mm induction-hardened piston shaft.
- These shocks are fully rebuildable
- Aftermarket upper control arms are recommended.
Front Diff drop kit - Recommended for all lifted 4x4s
Front Durobumps Bump Stops:
- DuroBumps bump stops for the 2nd & 3rd Gen Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening—greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.
Rear Durobumps Bump Stops:
- DuroBumps bump stops for the Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening—greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.
Rear Shocks:
- LK207R-P - Toytec 2.0 Aluma Series Rear shocks designed for 1-3" lift. Shock bodies are hard-anodized aluminum for cooler operation and longer lasting in the elements. Fully rebuildable. Perfect match to our Aluma coilovers.
Choose from rear Options:
- BK-1 Toytec 1" rear block kit (includes U-bolts)
- BK-15 Toytec Rear 1.5-inch Block Kit (includes U-bolts and BPV-E-brake cable brackets)
- SKLTUN-2247 - Toytec 1-1.5" Adjustable Shackles with new lower bushings
-
Shackle fit notes:
- **For vehicles with the TRD Exhaust, the exhaust will need to be modified to work with shackles.
-
** We have seen a few models which may require minor grinding on the bolts which interfere with the shackle at the 1" setting.
-
- P10047U-P - Toytec 2" lift rear leaf springs. Replace your worn out leaf pack. Ready to bolt in. Bushings are pressed in. Includes new ubolts.
Add Upper Control Arms to complete your kit:
- Tuff Country Ball Joint Style Upper Control Arms with - 50936. Built in additional caster to correct alignment. Heavy duty Grease-able sealed ball joint for low maintenance and quiet operation.
- Tuff Country Uniball Style Upper Control Arms - 50931. Improve your lifted Tundra's suspension travel, performance and eliminate any binding that can be caused by factory ball joints with these high quality uni-ball upper control arms.
- SPC Adjustable Upper Control Arms - 25490 - The most adjustable UCA on the market. Correct your alignment angles. Also great for adjusting for tire clearance.
| Manufacturer | Toytec Lifts |
|---|
Check items to add to the cart or
